Standards; General Information; Used Standards; Ce Marking - Bosch Rexroth IndraControl VDP 15.3 Operating Instructions Manual

Bosch Rexroth AG

Standards

8 Standards

8.1 General Information

The products have been developed according to the current German edition of
the standards at the time of product development.

8.2 Used Standards

Standard
EN 60,204 -1
EN 61,000-6-4
EN 61,000-6-2
EN 61,558-2-6
EN 60,664 -1
EN 61,131 -2
EN 61,131 -2
EN 60 529
EN 60,068-2-6
EN 60,068-2-27
EN 60 721-3-1 and
EN 60,721-3-3
Tab. 8-1: Used standards

8.3 CE Marking

8.3.1 Declaration of Conformity

The electronic products that are described in the present instructions, comply
with the requirements and the target of the following EU directive and with the
following harmonized European standards:
EMC Directive 2004/108/EC
The electronic products described in the present instructions are intended for
use in industrial environments and comply with the following requirements:
10/37
Meaning
Safety of machinery - Electrical equipment of machines
Generic standards - emission standard (industrial environments)
Generic standards – noise immunity (industrial environments)
Transformer for 24 V power supply unit, protective separation
Overvoltage category II
24 V outputs requirements
24 V current supply requirements
Degrees of protection (including housings and installation com-
partments)
Vibration test
Shock test
Climatic class
VDP 15.3, 18.3, 21.3 Multitouch
DOK-SUPPL*-VDPXX.3MTBU-IT02-EN-P