Entering The Destinations Manually - Toshiba e-STUDIO A Series Operator's Manual

4.Using the IP Fax Function

Entering the destinations manually

You can add a destination manually to the Recipient List.
You cannot enter destinations if [Restriction of Destination Selection Method]-[Prohibit Direct Entry] is enabled.
For details about the operation of "Restriction of Destination Method", refer to the TopAccess Guide.
For details about the [Recipient List] screen and the [Contact Property] screen, refer to the TopAccess Guide.
 P.84 "IP Fax Received Forward (Admin)"
1 Click [Destination Setting] (when creating a Fax/Internet Fax agent) or [TO: Destination Setting] /
[CC: Destination Setting] / [BCC: Destination Setting] (when creating an Email agent) to open the
Recipient List page.
Click [New].
2
The Contact Property page is displayed.
3 Enter the E-mail address or IP Fax number of the destination in the [Destination] box and select
the destination's fax type in the [Fax Type] box.
4 Click [OK].
The destination is added to the Recipient List page.
Repeat steps 2 to 4 to add all additional destinations that you require.
5
You can remove the destinations you added to the Recipient List before saving the destination settings.
For details, refer to the TopAccess Guide.
Click [Save].
6
The recipients are added as destinations.
78 Using the IP Fax Function from TopAccess