Toshiba e-STUDIO A Series Operator's Manual page 32

3.Setting the IP Fax Function
Item name
1 [Save] button
2 [Cancel] button
3 [Reset] button
4 [Delete] button
5 [Fax Setting] button
6 Destination
This is only available when [Shared Setting] - [Shared Address Book] is set to [Enable (Primary)] or [Enable
(Secondary)].
7 First Name
8 Last Name
9 Index
10 Email Address
11 Fax Number / IPFax
The format for SIP URI should be any of the following.
[User Name]@[Host Name]
[User Name]@[IP Address]
[User Name]@[Host Name]:[Port Number]
[User Name]@[IP Address]:[Port Number]
If IPv6 is used for Server IP Address, put the value in brackets ([ ]). (Link Local Address is not available.)
Example:
User1@192.168.1.1
User1@host.local
User1@[2001:0db8::1234:5678:90ab:cdef]
User1@192.168.1.1:5060
User1@host.local:5060
User1@[2001:0db8::1234:5678:90ab:cdef]:5060
12 Fax Type
13 2nd Fax Number
14 Company
32 Setting the IP Fax Function from TopAccess
Select this to save the entered information.
Select this to cancel the adding or editing a recipient.
Select this to reset information entered in the given box.
Select this to delete the displayed recipient.
Select this to register the recipient for fax/IP Fax transmission. For details
about the setting for the [Fax Setting] screen, refer to the TopAccess Guide.
Selects Local Address Book or Shared Address Book as the registration
target for recipient information.
Enters the first name of the recipient. You can enter up to 32 characters.
Enters the last name of the recipient. You can enter up to 32 characters.
Enters the characters to be used as the index. You can enter up to 64
characters.
Enters the E-mail address of the recipient. You can enter up to 192
characters. Select the [Favorite] check box to specify the recipient as
Favorite.
Enters the telephone number or the IP Fax number (host name, IP address,
IP Fax Number or SIP URI) of the recipient. You can enter up to 128
characters for the Fax Number and the IP Fax (Gateway, SIP). For the IP Fax
(Direct), you can enter up to 199 characters. Select the [Favorite] check box
to specify the recipient as Favorite.
Selects the fax type of the recipient.
 G3 Fax — Select this to send a fax job via a public network line.
 IPFax(Gateway) — Select this to send an IP Fax to a G3 Fax machine via a
T.38 supporting gateway.
 IPFax(SIP) — Select this to send an IP Fax to an MFP supporting the IP Fax
function via a SIP server.
 IPFax(Direct) — Select this to directly send an IP Fax to an MFP
supporting the IP Fax function without using a sever.
This cannot be used in the IP Fax function.
Enters the company name of the recipient. You can enter up to 64
characters.
Description