Introduction; Genuine Parts; How To Find Parts; How To Order Parts - Henny Penny HB-11 Technical Manual

Hand breader/sifter
Table of Contents

Advertisement

2-1. INTRODUCTION

2-2. GENUINE PARTS

2-3. HOW TO FIND PARTS

2-4. HOW TO ORDER PARTS

2-5. PRICES

2-6. DELIVERY

2-7. WARRANTY

3-7. RECOMMENDED
SPARE PARTS FOR
DISTRIBUTORS
206
This section identifies and lists the replaceable parts of the Henny Penny
HB-121 Hand Breader/Sifter.
Use only genuine Henny Penny parts in your unit. Using a part of lesser
quality or substitute design may result in unit damage or personal injury.
To find items you want to order from the Parts List, proceed as follows:
1. Refer to the exploded drawing in this section to identify the part
needed.
2. Use the item number from the exploded drawing to locate the
corresponding part in the parts list in this section. In this list will be the
Henny Penny part number and description of the part.
Once the part you want to order has been found in the Part List, write down
the following information:
1. From the exploded drawing and Parts List (Sample)
Item Number
Part Number
Description
2. From the data plate (Sample)
Product Number
Serial Number
Voltage
Your distributor has a price parts list and will be glad to inform you of the
cost of yours parts order.
Commonly replaced items are stocked by your independent Henny Penny
distributor and will be sent out when your order is received. Other parts
will be ordered by the distributor from Henny Penny Corporation.
Normally, these will be sent to your distributor within three working days.
All replacement parts (except lamps and fuses) are covered under warranty
for 90 days against manufacturing defects and workmanship. If damage
occurs during shipping, notify the carrier at once so that a claim may be
properly filed. Refer to the warranty in this manual for other rights and
limitations.
Recommended replacement parts, stocked by your distributor, are indicated
with
in the parts lists. Please use care when ordering recommended parts,
because all voltages and variations are marked. Distributors should order
parts based upon common voltages and equipment sold in their territory.
HB11.100
240 V
2-1

Advertisement

Table of Contents
loading

Table of Contents