Spare Parts; Ordering Data - Siemens SIMOTICS FD 1MM1 Series Operating And Installation Instructions

Spare parts

10.1

Ordering data

When ordering spare parts, in addition to the precise designation of the spare part, specify the
motor type and the serial number of the motor. Ensure that the spare part designation matches
the designation in the spare part lists and add the associated part number.
Example
● Bearing shield, drive end (Part 5.00)
● Machine type 1MM1
● Serial number D21234567010001
The machine type and the serial number are indicated on the rating plate and in the technical
data, and are also embossed on the drive end of the shaft.
Note
The graphical representations in this chapter show schematic diagrams of the basic versions.
They are used for spare parts definitions. The supplied version may differ in details from these
representations.
Data matrix code
A data matrix code is provided on the machine. You can retrieve the following information from
the data matrix code:
● Machine type
● Serial number
● Using the Data Matrix code and the "Siemens Industry Online Support" App, you can access
See also
Service and Support (Page 167)
Quality documents (Page 171)
SIMOTICS FD 1MM1
Operating Instructions 02/2019
product information such as the operating instructions and certificates of your machine.
10
143