Table 9-5 Alternative Greases With Nlgi Class 2 For Motors Of Horizontal Construction - Siemens SIMOTICS FD 1MM1 Series Operating And Installation Instructions

Maintenance
9.1 Inspection and maintenance
Manufacturer
BP
Fuchs
Lubcon
Addinol
FAG
For motors of horizontal construction you can alternatively use greases with NLGI class 2.
However, this reduces the lubrication interval by 20%.
Table 9-5
Manufacturer
Shell
ExxonMobil/Esso
BP
Castrol
Lubcon
Shell
FAG
Lubrication data
The following data is provided on the lubricant plate of the machine.
● Regreasing intervals in operating hours
● Regreasing amount in grams
● Grease type
Grease replacement intervals
The grease replacement intervals in these operating instructions or the regreasing intervals
indicated on the plate apply to the following conditions:
● Normal load
● Operation at speeds in accordance with rating plate
● Low-vibration operation
● Neutral ambient air
● High-quality rolling bearing greases
In the case of unfavorable operating conditions, reduce the relubrication intervals after prior
consultation with the manufacturer.
126
Grease type
Energrease LS3
Renolit H443 HD88
Turmoplex 3
LM 3 EP
Arcanol Multi 3
Alternative greases with NLGI class 2 for motors of horizontal construction
Grease type
Gadus S2 V100 2
Unirex N2
Energrease LS2
Longtime PD2
Turmogrease L 802 EP plus
Retinax LX2
Arcanol Multi 2
SIMOTICS FD 1MM1
Operating Instructions 02/2019