1.
Attach item 1 to item 2 with three 3/8" dia.
carriage bolts and nuts. Leave loose. See
(FIGURE 07).
2.
Install item 4 to item 1.
3.
Position item 5 on item 6 and 4.
4.
Tighten chain by pulling winch assembly towards
the head-end and tighten the three carriage bolts
from step 1.
8
7
5
ASSEMBLY
WINCH ASSEMBLY
FIGURE 07
B4
13000003449-21-01
5.
Mount items 1 and 2 to item 3 using 1/2" dia. x
8" bolt and lock nut at boot end and 1/2" dia. x
9" bolt and lock nut at head end.
6.
Install item 7 to item 6.
7.
Insert item 8 through items 7 and 6.
8.
Refer to SET-UP PROCEDURES page B1 step 3
for the next set of instructions.
FEED TUBE ASSEMBLY HEAD END
(FIGURE 12 & 13)
7
4
6
2
3