Top Lift Frame Assembly - Meridian SLMD SERIES Assembly And Parts List

TOP LIFT FRAME ASSEMBLY

1. Lay frame out as shown in (FIGURE 09).
2. Fasten item 4 to item 5 using cylinder pin.
3. Connect item 5 to item 3 using 5/8" dia. bolts,
washers, and nuts.
4. Connect item 1 to item 3 using 5/8" dia. bolts, washers
and nuts.
2
1
BOTTOM LIFT FRAME
ASSEMBLY END
(FIGURE 01)
ASSEMBLY
3
FIGURE 09
13000003449-23-01
5. Connect item 6 to item 3 using 5/8" dia. bolts, washers
and nuts.
6. Connect item 2 to item 1 using 5/8" dia. bolts, washers
and nuts.
7. Connect item 2 to item 5 using 5/8" dia. bolts, washers
and nuts.
8. Refer to SET-UP PROCEDURES page B1 step 5 for
next set of instructions.
B6
TUBE ASSEMBLY END
(FIGURE 01)
6
5
4