1. Slide LIFT ARM ASSEMBLY into SADDLE
ASSEMBLY and fasten in place using items 3
and 5.
2. Install CABLE ROLLER ASSEMBLY item 1 and item
7 on to pin.
3. Thread cable end from winch around CABLE
ROLLER ASSEMBLY #1 and #2 through PIPE
and around CABLE ROLLER ASSEMBLY #3.
CABLE
SAFETY
HOOK
1
2
ASSEMBLY
LIFT ARM ASSEMBLY
CABLE ROLLER
ASSEMBLY #3
PIPE
FIGURE 11
13000003449-25-01
4. Slide cable through item 2. Locate item 2 7"
from cable end. Bend the last 7" of cable back
onto itself and fasten using item 1. Locate Item 1
4" above item 2.
5. Slide item 6 over PIN and SADDLE ASSEMBLY
and loack in place with item 4.
6. Refer to SET-UP PROCEDURE page B1 step 10
for the next set of instructions.
LIFT ARM
ASSEMBLY
CABLE ROLLER
ASSEMBLY #2
3
4
B8
5
6
7
CABLE ROLLER
ASSEMBLY #1
PIN
SADDLE
ASSEMBLY