Ignition Procedure; Water Temperature Adjustment; Eco Mode; Switch-Off Procedure - Ariston NEXT EVO X SFT Series User Manual

USER'S MANUAL

Ignition procedure

- ensure that the valve located on the cold water fitting
is open
- ensure that the gas valve is open
- ensure that the
powered by electric current.
Press ON/OFF button "4", the
display will light up.
The device is ready to operate
The set temperature is indicated
on the display.
By opening the hot water valve,
the device automatically starts
operating.
The display shows
temperature and the
indicates the burner ignition.
WARNING!!
Water with a temperature higher than 50°
can cause serious burns.
Always verify water temperature before
use.
Note: If the device does not operate, ensure that the gas
and/or cold water valves are open.
Ensure that the device is electrically powered.
When closing the valve, the device automatically switches
off and the flame symbol disappears from the display.

Water temperature adjustment

Press or to set the hot
water temperature.
The new value will be indicated on
the display
It's possible to increase the temperature up to 65 °C
To set the water temperature from 35 to 48 °C press the
+ button repeatedly. Pressing and releasing will trigger a
rise of 1 degree Celsius.
From 48 to 65 °C see the table.
6 /
device is
the set
flame
T range D T setting
35-48° C 1° C
48-50° C 2° C
50-55° C 5° C
55-60° C 5° C
60-65° C 5° C
Child lock function
It's necessary switch OFF the appliance to reset the
temperature range. Afterwards the temperature range will
revert back to 35-48° C.

ECO mode

To activate the ECO mode press
the button 3.
To increase or decrease the
temperature press the button 2
or .
When the ECO mode is activated
the symbol appear on the
dislpay.
To exit from ECO mode is necessary to push the button 3
when the appliance is in stand-by mode.
Switching off procedure
Press the ON/OFF button, to switch off the appliance.
To switch off the completely, turn the outer electric switch
in the off position. Close the gas valve.
Push button
Push button for 5 sec
Push "+" button
Switch OFF the machine and
then push button for
5 sec
Push button
ECO