Sony HANDYCAM VISION TRV208E Operating Instructions Manual page 198

Identifying the parts and controls
To prepare the Remote Commander
Insert 2 R6 (size AA) batteries by matching the +
and – polarities on the batteries to the + – marks
inside the battery compartment.
Notes on the Remote Commander
•Point the remote sensor away from strong light
sources such as direct sunlight or overhead
lighting. Otherwise, the Remote commander
may not function properly.
•Your camcorder works in the commander mode
VTR 2. The commander modes 1, 2 and 3 are
used to distinguish your camcorder from other
Sony VCRs to avoid unintentional operations. If
you use another Sony VCR in the commander
mode VTR 2, we recommend changing the
commander mode or covering the sensor of the
VCR with black paper.
198
RMT-814
RMT-708