Sony HANDYCAM VISION TRV208E Operating Instructions Manual page 122

Dubbing only desired scenes
– Digital program editing
Operation 2: Performing Digital
program editing (Dubbing a
tape)
Make sure that your camcorder and VCR are
connected, and that the VCR is set to recording
pause. This procedure is not necessary when you
use the i.LINK cable (DV connecting cable).
When you use a digital video camera recorder,
set its POWER switch to VCR/VTR.
(1) Select VIDEO EDIT. Turn the SEL/PUSH
EXEC dial to select START, then press the
dial.
(2) Turn the SEL/PUSH EXEC dial to select
EXECUTE, then press the dial.
Search for the beginning of the first
programme, then start dubbing.
The programme mark flashes.
The SEARCH indicator appears during a
search, and the EDITING indicator appears
during editing on the screen.
The programme mark changes to light blue
after dubbing is complete.
When dubbing ends, your camcorder and
VCR stop automatically.
To stop dubbing during editing
Press x on your camcorder.
To quit the Digital program editing function
Your camcorder stops when dubbing is complete.
Then the display returns to VIDEO EDIT in the
menu settings.
Press MENU to quit the Digital program editing
function.
You cannot record on the VCR when:
– The tape has run out.
– The write-protect tab on the cassette is set to
lock.
– The IR SETUP code is not correct. (when IR is
selected)
– The button to cancel recording pause is not
correct. (when IR is selected)
NOT READY appears on the LCD screen when:
– The programme to operate Digital program
editing has not yet been made.
– i.LINK is selected but the i.LINK cable (DV
connecting cable) is not connected.
– The power of the connected VCR is not turned
on. (when you set i.LINK)
122
–
(1)
(2)
x
–
–
–
–
–
–
–