Sony HANDYCAM VISION TRV208E Operating Instructions Manual page 106

Dubbing a tape easily
– Easy Dubbing
(3) Setting your camcorder and the
VCR to face each other
Locate the Infrared rays emitter of your
camcorder and face it towards the remote
sensor of the VCR.
Set the devices about 30 cm (12 in.) apart, and
remove any obstacles between the devices.
CCD-TRV408E
(4) Confirming the VCR operation
1 Insert a recordable tape into the VCR,
then set to recording pause.
2 Turn the SEL/PUSH EXEC dial to select
IR TEST, then press the dial.
3 Turn the SEL/PUSH EXEC dial to select
EXECUTE, then press the dial.
If the VCR starts recording, the setting is
correct.
When finished, the indicator changes to
COMPLETE.
106
Infrared rays emitter/
CCD-TRV408E
Remote sensor/
A/V connecting cable (supplied)/
1
2
3
2
E A S Y D U B B I N G 0 0 : 0 0 : 0
S E T U P
I R SETUP
PAUSE MODE
I R TEST R E A D Y
R E T U R N
NORMAL
[ E A S Y D U B ] : E N D
E A S Y D U B B I N G 0 0 : 0 0 : 0
S E T U P ENGAGE
I R SETUP REC PAUSE
PAUSE MODE
I R TEST R E T U R N
EXECUTE
R E T U R N
NORMAL
[ E A S Y D U B ] : E N D