Run-Time; On-Time - Hitachi SJ700-2 Series Instruction Manual

Variable name
Cumulative

RUN-Time

operation RUN
time monitoring
- Explanation
This variable can be used to monitor the accumulated running time of the inverter. The data monitored
with this variable corresponds to the data monitored by the cumulative operation RUN time monitoring
function (d016). This variable is read-only.
- Sample program: Program to output a one-second pulse signal indicating the running time of the
inverter to a contact output every hour
：
LOOP UL(01)=
(01)".
UL(00)=
if
Y(00)=
delay off
LBL1 goto
：
Variable name
Cumulative

ON-Time

power-on time
monitoring
- Explanation
This variable can be used to monitor the accumulated power-on time of the inverter. The data
monitored with this variable corresponds to the data monitored by the cumulative power-on time
monitoring function (d017). This variable is read-only.
- Sample program: Program to convert the power-on time into a number of days and output the
converted data as word data to Y (00) to Y (05)
UL(00)=
UL(00)=
Yw=
：
Range of values
0 to 999999
UL(00)
RUN-Time
UL(00) = UL(01)
1
Y(00) TD(2) 100
LOOP
Range of values
0 to 999999
ON-Time
UL(00) / 24
UL(00) and 31
Chapter 5 Instruction Words
Default Unit
- Hour
: Set the previous data in variable "UL
: Fetch the running-time data.
then LBL1
: Turn Y (00) on.
: Turn Y (00) off after 1 second elapses.
Default Unit
- Hour
: Fetch the power-on time data.
: Convert the data into a number of days.
: Output the data to Yw.
5 - 45
Data size Attribute
Unsigned
Readable
2-word data
Data size Attribute
Unsigned
Readable
2-word data