Saving A Program In Eeprom; Compilation And Downloading - Hitachi SJ700-2 Series Instruction Manual

Chapter 4 How To Use EzSQ

4.9 Saving a Program in EEPROM

After a program has been downloaded normally to the inverter, you can save it in internal memory
(EEPROM) of the inverter.
To save the downloaded program, select "EEPROM save" from the "Run" menu on the menu bar.

4.10 Compilation and Downloading

You can compile and download a program as a series of processes with a single command.
(1) Select "Compile & download" from the "Run" menu on the menu bar.
(You can also execute the "Compile & download" command by clicking the
bar.)
(2) EzSQ compiles the program and, if no error is detected, downloads it to the inverter successively.
Click the [OK] button in the dialog box shown below.
(3) After the program is downloaded (transferred) to the inverter, a dialog box appears to ask you
whether to save the downloaded program in the inverter's EEPROM.
Click the [Yes] button to save the downloaded program in the inverter's EEPROM. Click the [No]
button to omit saving.
(4) After the download process ends, an end message dialog box appears. Click the [OK] button.
Note: If EzSQ detects an error during compilation, it displays the line where the error is detected. In such
case, correct the indicated line of the program.
4 - 16
icon under the menu