Hitachi SJ700-2 Series Instruction Manual page 40

Chapter 4 How To Use EzSQ
(b) Entering instructions from the lists
When selected, specific cells show a pull-down list mark
enter an instruction, variable, or other parameter from the pull-down list.
1) Click the mark or press the space bar on the keyboard.
2) A pull-down list appears to show the instructions that can be entered in the cell.
2)
3) If the desired instruction is not shown, use the vertical scroll bar along the right edge of the list to
scroll through the list.
4) Select and click the instruction to be entered. (You can also use the arrow keys ([↑] and [↓]) on the
keyboard to select an instruction, and then press the Enter key to enter it.)
5) The instruction selected in the list is entered in the selected cell.
1)
4 - 8
at the right end. You can select and