Sony MZ-N10 Notes: installing & operating OpenMG Service Manual page 16

MZ-N10
Example2: When the keys on the remote commander are con-
sidered as OK:
Remote commander LCD display
888
RMC OK **
Set LCD display
888
RMC OK **
** : AD value of the remote commander key
(hexadecimal 00 to FF)
5. When all keys were checked or if the upper panel is opened,
the key check mode quits and the test mode (display check
mode) comes back.
• Jog check mode
Jog check mode is available during the key check mode.
1. Turn the jog dial downwards one click.
Remote commander LCD display
000
JOG+ 1 **
2. Turn the jog dial downwards three more clicks.
Remote commander LCD display
000
JOG+OK **
3. Turn the jog dial upwards one click.
Remote commander LCD display
000
JOG- 1 **
4. Turn the jog dial upwards three more clicks.
Remote commander LCD display
000
JOG-OK **
16