Recording with an
External Microphone
Stereo
microphone
To the
(microphone)
jack
Tip
Before you start recording, we recommend
you make a trial recording first.
1
Connect an external microphone to
the
(microphone) jack when the
IC recorder is in the stop mode.
"SELECT INPUT" appears in the display
window.
2
Press
then press
3
Press
recording.
The built-in microphones are
automatically cut off.
If the input level is not strong enough,
adjust the recording level on the IC
,
recorder.
When a plug in power type
microphone is connected, power
is automatically supplied to the
microphone from the IC recorder.
Note
If "SELECT INPUT" is not displayed, set it in the
menu (page 89).
Recommended microphones
You can use the Sony ECM-CS10, or ECM-CZ10
electret condenser microphone (not supplied).
or
to select "MIC IN,"
.
(record/pause) to start
GB