Sony 4-127-580-13(1) Operating Instructions Manual page 115

Symptom
The "UPDATING
DATABASE... " display does
not disappear.
You cannot connect the IC
recorder to a computer.
It takes time to start up
the IC recorder.
The IC recorder does not
operate correctly.
The IC recorder does not
operate.
The IC recorder is not
recognized by your
computer.
A folder/file cannot be
transferred from your
computer.
The file transferred from
your computer cannot be
played back.
Remedy
If the IC recorder is required to process excessive amount

of data, "UPDATING DATABASE... " may be displayed for an
extended period of time. This is not a malfunction of the IC
recorder. Wait until the message disappears.
Refer to the help files of the Digital Voice Editor 3 software.

When there are many messages stored in the IC recorder, it

may take time to start up. This is not a malfunction. Wait until
the stop mode display appears.
Take out the batteries and insert them again (page 14).

You may have formatted the memory of the IC recorder using

the computer. Use the IC recorder formatting function to
format the memory (page 90).
Disconnect the IC recorder from your computer and reconnect

it.
Do not use a USB hub or USB extension cable other than the

supplied USB connecting cable. Connect the IC recorder to
your computer using the supplied USB connecting cable.
Operation is not guaranteed if you use any system

requirements other than those described on page 94.
Depending on the USB connector position, the IC recorder

may not be recognized. If this happens, try another connector.
The file format may differ from those that can be played back

using the IC recorder (.mp3/.wma /.msv/.wav) (page 101).
Check the file name.
11
GB