Using The Ic Recorder As A Usb Mass Storage Device - Sony 4-127-580-13(1) Operating Instructions Manual

Using the IC Recorder
as a USB Mass Storage
Device
When the IC recorder is connected to
your computer image data or text data
on the computer, as well as messages or
files recorded using the IC recorder can
be temporarily stored in the IC recorder.
For details on the system requirements,
see page 94.
1
Connect the IC recorder to your
computer using the supplied USB
connecting cable (page 95).
On the Windows screen; open "My
Computer" and make sure that "IC
RECORDER" has been recognized. On
the Macintosh screen; make sure that
an "IC RECORDER" drive is displayed on
the desk top.
2
Copy the folder of the data files
to be stored to the IC recorder by
dragging and dropping.
On the Windows screen using Explorer,
and on the Macintosh screen using
Finder, drag and drop the folder onto
the IC recorder.
The IC recorder can recognize up to
500 folders. You can copy up to 999
files to one folder and up to 5,000 files
in total.

Note
To disconnect the IC recorder from your
computer, refer to page 96.
10
GB