Table of Contents
Advertisement
1. Getting Started
20.
Enter WEP key, and then press [OK].
21.
Press [OK].
The settings are complete.
You can connect the device in Ad hoc mode by specifying the SSID, channel, and security method that
are specified for the machine.
See the instructions supplied with the device for how to connect it in ad hoc mode.
Connecting in Infrastructure Mode
Use infrastructure mode to connect the machine to an access point.
• The Wireless LAN interface board must be installed to use Infrastructure mode.
• When you use IPv6, set Effective Protocol to Active in Interface Settings in System Settings. IPv6 is
inactive as a factory default. When you enable IPv6, a link-local address is automatically set.
• To use IPv6, consult your network administrator.
1.
Press [Home] (
2.
Flick the screen to the left, and then press the User Tools icon ( ).
3.
Press [Machine Features].
4.
Press [System Settings].
5.
Press [Interface Settings] tab.
6.
Press [Network].
7.
Press [LAN Type].
8.
Press [Wireless LAN].
9.
Press [Wireless LAN].
10.
Press [Communication Mode], and then press [Infrastructure Mode].
11.
Press [OK].
24
) at the bottom of the screen in the center.
Advertisement
Table of Contents
