Table of Contents
Advertisement
Connecting in Ad hoc Mode
In Ad hoc mode, you can specify an SSID to the machine, and connect your computer directly to the
machine via a wireless LAN.
• The Wireless LAN interface board must be installed to use Ad hoc mode.
1.
Press [Home] (
) at the bottom of the screen in the center.
2.
Flick the screen to the left, and then press the [User Tools] icon ( ).
3.
Press [Machine Features].
4.
Press [System Settings].
5.
Press [Interface Settings] tab.
6.
Press [Network].
7.
Press [LAN Type].
8.
Press [Wireless LAN].
9.
Press [Wireless LAN].
10.
Press [Communication Mode], and then press [802.11 Ad-hoc Mode].
11.
Press [OK].
12.
Press [SSID Setting].
13.
Press [Enter SSID] and enter SSID, and then press [OK].
14.
Press [OK].
15.
Press [Ad-hoc Channel], and then press the channel to use.
16.
Press [OK].
17.
Press [Security Method].
18.
Press [WEP].
To not use security setting, select [No].
19.
Press [Enter] in [WEP (Encryption) key].
Connecting and Setting the Network
23
Advertisement
Table of Contents
