Table of Contents
Advertisement
8. Adding Paper and Toner
• The default of [Bypass Tray] is [Driver / Command].
1
• Use A4 , 8
• Usually only one side of OHP transparencies can be used for printing. Be sure to load them with the
print side down.
• When printing onto OHP transparencies, remove printed sheets one by one.
1.
Press [Change Setting] on the bypass tray paper settings screen.
2.
Select the type of paper that is loaded.
If you want to set the paper thickness, press [Paper Thickness] and set a paper thickness.
3.
Press [Next].
4.
Select the size of the paper that is loaded.
If you want to specify a custom size, press [Custom] and enter a paper size.
5.
Press [OK] twice.
Registering the current paper settings for the bypass tray
1.
Press [Recall/Program] on the bypass tray paper settings screen.
2.
Press [Program].
3.
Press the name area, and then enter a name.
4.
Press OK.
To apply the registered settings to the currently loaded paper, press [OK].
To finish specifying the settings, press [Cancel].
Recalling the paper settings for the bypass tray
1.
Press [Recall/Program] on the bypass tray paper settings screen.
2.
Select a name of the settings to recall.
3.
Press OK twice.
Modifying the name registered for the paper settings for the bypass tray
1.
Press [Recall/Program] on the bypass tray paper settings screen.
2.
Select the name to modify.
3.
Press [Edit], and then enter a new name.
4.
Press [OK].
To apply the registered settings to the currently loaded paper, press [OK].
To finish specifying the settings, press [Cancel].
Deleting the registered paper settings for the bypass tray
1.
Press [Recall/Program] on the bypass tray paper settings screen.
184
/
× 11
size OHP on Home screen 4 transparencies, and specify their size.
2
Advertisement
Table of Contents
