Teledyne 4700 Pocket Manual page 31

3. Store the arm in a safe location for future
use.
Then install the bottle:
4. Screw the cap with a hole onto the bottle.
5. Place the bottle in the center of the
refrigerator.
6. Feed the discharge tube into the hole (see
Figure 2-5).
7. Connect the other end of the discharge tube
to the bulkhead fitting at the top-front
corner of the refrigerator.
Figure 2-5 One 20 liter bottle configuration
with discharge tube through
the bottle cap
Section 2 Installation
2-15