Panasonic FOMA P900iV Manual page 108

Ringing Time
You can set the ringing time for incoming video-phone calls until remote monitoring starts.
1
Video-phone Remote monitor
Enter the Terminal Security Code
● See page 208 for the Terminal Security Code.
2
Enter a ringing time (seconds).
● Enter from "003" to "120" in three digits.
● Not to change a ringing time, just press
● You cannot set the ringing time for Remote Monitor, Automatic Answer, and Record
Message to the same second. Set different seconds for each.
Set Remote Monitor
You can set whether to activate remote monitoring for when receiving video-phone calls from
phone numbers stored as "Other ID".
1
Video-phone Remote monitor Enter the Terminal Security
Code
ON ················For automatically answering video-phone calls from phone numbers stored as "Other ID" after the set
ringing time, and then remotely monitoring those calls. (You cannot select "ON" when "Other ID" is
not stored.)
OFF···············For disabling automatic remote monitoring of video-phone calls from phone numbers stored as "Other
ID". The usual answering operation for video-phone calls will be enabled.
● Remote monitoring is invalid during Manner Mode, and a message to this effect appears when you set to "ON".
● See page 208 for the Terminal Security Code.
● " " is displayed while "Remote monitor" is "ON".
106
Set
5 seconds (When "Remote monitor" is set to "ON")
Ringing time
without entering a time.
Setting at purchase
Setting at purchase
OFF