Making A Call - Panasonic FOMA P900iV Manual

Making a Call

1
Enter the other party's phone number, starting with the area
code.
● Even when you are dialing within the same area, you have to enter the area code before
the phone number.
<Example>
Area code City code
03 XXXX
● To make calls to mobile phone
090 − XXXX − XXXX
080 − XXXX − XXXX
● To make calls to PHS
070 − XXXX − XXXX
2
You can start talking when the other party comes online.
● The phone number you enter will disappear momentarily and then reappear one digit at a
time from the right of the display.
● The FOMA phone differs from other phones in making a transmission signal before the
call signal.
● " " blinks during calling, and lights steadily once you are connected.
● You can also dial out by entering the phone number and then pressing
● You will hear a message to the effect that your call cannot be connected when the
destination mobile phone or PHS is not turned on or the radio signal does not reach.
● If you hear a message requesting your Caller ID (see page 302), follow the procedure for "Notify caller ID" (see
page 63) to enter "186" or " : 31#" and redial the number.
● When the dialed party is online you will hear the busy signal. Press
● If date and time have already been set, the current time is displayed on the Talking display.
● When you switch to Viewer style during a call, your voice cannot be heard by the other party if you have not set
to Hands-free or the Flat-plug Earphone/Microphone Set with Switch is not connected.
3
To end the call, press
Information
● You can make voice calls using "Multiaccess" even when using i-mode or exchanging mail.
● You cannot make voice calls during 64K data transmission or video-phone calls.
● If you have brought up a display other than the Talking display during a call, you can return to the Talking display by
pressing several times. You can end calls by pressing
● Internal phones and other phones that do not support the entry of area codes cannot be used for dialing to the FOMA
phones.
● You can also dial out by pressing
entering the phone number, press
● All incoming video-phone calls during voice calls are treated as "Call rejection" so you will not be able to take them.
When you finish the voice call and see the "Missed call" icon, there will be a record of the incoming call. (The "Missed
call" icon might not appear and the incoming call record might not be kept depending on the contracts and settings for
the Voice Mail, Call Waiting, and Call Forwarding Services.)
● You cannot dial out by entering the phone number when "Keypad dial lock", "Restrict dialing" or "Self mode" is activated.
66
Subscriber number
XXXX
Other party's phone number (11 digits)
Other party's phone number (11 digits)
.
and then entering the party's phone number. If you make a mistake when
and then enter the number again when the wrong number is cleared.
.
and wait a while before dialing again.
from the Talking display.