Module Operation Mode; Security - Mitsubishi Electric RD78G4 User Manual

Module Operation Mode

Set the module operation mode of the Motion module.
Item Description
Module Online
Operation • Select this mode to connect the Motion module to the network for performing data link with other
Mode stations.

Security

Set the security measures for access to the Ethernet device.
Item
IP Filter IP Filter
Settings
IP Filter Settings
IP Filter Settings
Up to 32 IP addresses can be set as an IP address to be allowed or denied by the IP filter.
Range specification as a single setting and specification of the IP addresses to be excluded from the set range are also
possible.
Item
Access from IP address below
Range Setting
IP Address
IP Address Excluded from Range
Description
Set whether to use the IP filter.
Set the IP addresses to be allowed or denied.
Description
Select whether to allow or deny the access from the specified IP addresses.
Select this item when specifying the IP addresses by range.
Set the IP addresses to be allowed or denied.
When selecting "Range Setting", enter the start IP address (left field) and end IP address
(right field) of the range.
When selecting "Range Setting", set the IP address to be excluded from the set range.
Up to 32 IP addresses can be set.
Setting range

Setting range
• Not Use
• Use
(Default: Not Use)

Setting range
• Allow
• Deny
(Default: Allow)
(Default: Clear)
0.0.0.1 to
223.255.255.254
(Default: empty)
0.0.0.1 to
223.255.255.254
(Default: empty)
2 PARAMETER SETTINGS
2.4 Application Settings
2
41