Cc-Link Ie Tsn Configuration" Window; Parameter Setting Of A Slave Station - Mitsubishi Electric RD78G4 User Manual

2.5

"CC-Link IE TSN Configuration" Window

Set parameters of slave stations (the number of points and assignment of link devices) in the master station.
Perform either the parameter setting of slave stations or the detection of connected/disconnected devices.
Navigation window  "Parameter"  "Module Information"  Target module  "Module Parameter (Network)"  "Basic
Settings"  "Network Configuration Settings"

Parameter setting of a slave station

1.
Select the module in "Module List" and drag it to the list of stations or the network map.
List of stations
Network map
2.
Set the required items.
3.
Select [Close with Reflecting the Setting] and close the "CC-Link IE TSN Configuration" window.
2 PARAMETER SETTINGS
42
2.5 "CC-Link IE TSN Configuration" Window
Drag and drop the text.