Sony SCPH-131 Instruction Manual page 38

38
C
Bqa
Bqd
B8
D
qf
qh
B6
B9
Bqd
qg
qj
US
Enjoying SoundScope (Continued)
C Operation with the
Mouse
You can also operate SoundScope
using the Mouse (SCPH-1090U:
sold separately). Refer to B for the
operation evoked.
For the CD operation screen
• To move the mouse pointer (+):
Move the Mouse.
• To select the items: Press the left
button.
D Additional operations
To change the size of the image
Press the directional buttons (up or
down) while holding down the
button.
To change and store the
settings
1 During playback, press the
R1 button while holding
down the button.
A round mark flashes on the
lower right of the screen
(Dqf).
2 Operate the controller.
While the round mark is
displayed, any changes you
make to the SoundScope
operation with the controller
are stored.
3 When you are finished, press
the R1 button while holding
down the button.
The round mark disappears
and the procedure is
completed.
Note
Do not unplug the controller during
these procedures.
To switch to stored settings
1 During playback, press the L1
button while holding down
the button.
A round mark appears on the
lower left of the screen
(Dqg), and the SoundScope
image is transformed by the
stored operation.
2 Press the L1 button while
holding down the button.
The round mark disappears
and the procedure is
cancelled.
Tip
Your stored setting is lost when you turn
™
off the PlayStation (PS one ). If you
®
want to keep the data, you can save and
load it using a memory card with one
memory block.
(Continued)