Table of Contents
Advertisement
An icon indicating that data is being written is displayed after shooting. Do not remove the memory card while the icon is
displayed.
The following settings for still image shooting are applied to the movie shooting:
White Balance
Creative Style
Metering Mode
Face/Eye AF Set.
Face Priority in Multi Metering
D-Range Optimiser
You can change the settings for ISO sensitivity, exposure compensation, and focus area while shooting movies.
While shooting movies, the recorded image can be output without the shooting information display by setting [HDMI Info. Display]
to [Off].
Note
The monitor turns off after approximately one minute without any operations by the user during movie recording (default setting).
To turn on the monitor again, press either the MENU button, any of the up/down/left/right buttons, or the
set MENU →
(Camera Settings2) → [
Sound from camera operations is recorded during movie recording. The sound of the SHUTTER/MOVIE button operating may be
recorded when movie recording is finished.
Recording may stop to protect the camera depending on the ambient temperature.
Sound will not be recorded if you select MENU →
The temperature of the camera tends to rise when shooting movies continuously, and you may feel that the camera is warm. This
is not a malfunction. Also, [Internal temp. high. Allow it to cool.] may appear. In such cases, turn the power off and cool the
camera and wait until the camera is ready to shoot again.
If the
icon appears, the temperature of the camera has risen. Turn the power off and cool the camera and wait until the
camera is ready to shoot again.
For the continuous shooting time of a movie recording, refer to
product, depending on the temperature of the product or the battery.
When shooting movies in the [
reason, the shutter speed may become fast in a bright environment, and the motion of the subject may not be recorded smoothly.
By changing the exposure mode to [
recorded smoothly.
In movie shooting mode, ISO sensitivity can be selected from ISO 125 to ISO 12800. If the ISO value is set to a value smaller
than ISO 125, the setting is automatically switched to ISO 125. When you finish recording the movie, the ISO value returns to the
original setting.
When ISO sensitivity is set to [Multi Frame NR], [ISO AUTO] will be set temporarily.
In movie shooting mode, the following settings cannot be set in [Picture Effect]. When a movie recording starts, [Off] will be set
temporarily.
Soft Focus
HDR Painting
Rich-tone Mono.
Miniature
Watercolor
Illustration
If you point the camera at an extremely strong light source while shooting a movie at low ISO sensitivity, the highlighted area in
the image may be recorded as a black area.
Use PlayMemories Home when importing XAVC S movies and AVCHD movies to a computer.
Related Topic
Intelligent Auto (movie)
Focus Mode
Mon. Off dur REC] to [Off], the monitor will not turn off during movie recording.
(Camera Settings2) → [Audio Recording] → [Off].
"Recordable time of
Program Auto] mode, the shutter speed is set automatically and cannot be changed. For that
Manual Exposure] and adjusting the shutter speed, the motion of the subject can be
46
(Enter) button. If you
movies". Recording may stop to protect the
Advertisement
Table of Contents
