Table of Contents
Advertisement
Help Guide
Digital Still Camera
DSC-RX0M2
Controlling multiple cameras from a smartphone via Wi-Fi (Multiple connections)
With Imaging Edge Mobile, you can use a smartphone to control multiple cameras. You can control up to five cameras
simultaneously.
With multiple connections, one of the cameras is set as the "group owner" and connected to the smartphone via Wi-Fi.
Each of the other cameras is set as a "client" and connected to the group owner via Wi-Fi. Clients communicate with the
smartphone through the group owner.
(A): Smartphone
(B): Group owner
(C): Clients
Only the DSC-RX0M2 can be connected as the group owner or client.
On the camera that you want to connect as the group owner, select MENU →
1
Smartphone] and set as follows.
[Ctrl w/ Smartphone]: [On]
[
Connection Type]: [Multi (Group Owner)]
Connect the smartphone and the group owner.
2
(A): Smartphone
(B): Group owner
Connect the group owner to the smartphone by performing the following procedure.
1.
On the group owner, select [
The QR Code and SSID for multiple connections will be displayed.
2.
Scan the QR Code on the monitor of the group owner with Imaging Edge Mobile (installed on your
smartphone) to connect.
Scan the QR Code using the same method as the procedure for a single connection.
Connection Info.] under [Ctrl w/ Smartphone].
233
(Network) → [Ctrl w/
Advertisement
Table of Contents
