Table of Contents
Advertisement
Help Guide
Digital Still Camera
DSC-RX0M2
Self-timer
Shoots an image using the self-timer after a designated number of seconds have elapsed since the SHUTTER/MOVIE
button was pressed. Use the 5-second/10-second self-timer when you are going to be in the picture, and use the 2-
second self-timer to reduce camera-shake caused by pressing the SHUTTER/MOVIE button.
MENU →
(Camera Settings1) → [Drive Mode] → [Self-timer].
1
Select the desired mode using the right/left button.
2
Adjust the focus and shoot the image.
3
A beep sounds, and a picture is taken after the designated number of seconds has elapsed.
Menu item details
The mode determines the number of seconds until a picture is taken after the SHUTTER/MOVIE button is pressed.
Self-timer: 10 Sec
Self-timer: 5 Sec
Self-timer: 2 Sec
Hint
Press the SHUTTER/MOVIE button again to stop the count of the self-timer.
To exit the self-timer mode, select MENU →
To use the self-timer in bracket mode, select bracket mode under drive mode, then select MENU →
[Bracket Settings] → [Selftimer during Bracket].
Related Topic
Audio signals
(Camera Settings1) → [Drive Mode] → [Single Shooting].
4-748-164-11(1) Copyright 2019 Sony Corporation
108
(Camera Settings1) →
Advertisement
Table of Contents
