Installing The Hinge Plate - Dometic DM Series Installation Manual

RM1350, RM1350SL
48
Screw
➤ Secure the refrigerator using two screws (not
provided) through the holes underneath the top
decoration panel.
➤ Seal the openings for the screws on the metal
frame using tape or sealant.
➤ Install the lower front strip by sliding it under the
bottom hinge plate. Refer to "6.3 Installing the
hinge plate" on page 29.
➤ Secure the refrigerator and the lower front strip
using two screws (not provided).

6.3 Installing the hinge plate

I
The refrigerator is provided with a lower front strip that is shipped as a loose part.
➤ Attach the front strip after the refrigerator is set into the cutout opening.
50
Screw
➤ Slide the lower front strip under the bottom hinge plate(s).
➤ Secure the hinge plate(s) and the lower front strip using two screws (not provided).
29
49
Top Panel
➤ Install one screw (not provided) in the rear base.
51
Hinge
Plate
Front Strip
An optional screw may be added on the opposite
side.
Hinge Plate
Screw
Refrigerator
Ice Maker Cord
(optional)
Screw
Front Strip
EN