Side Vents - Dometic DM Series Installation Manual

Side vents

Upper and Lower Plastic Side Vent
(No. 3109350.xxx)
13
21-9/16"
13-3/4"
➤ Place the frame into the cutout.
➤ Secure the frame using seven #10 screws (not
provided) through the inside flange of the frame.
I
Seven Z-brackets could be used if the wall is
of laminate construction. Use #10 screws (not
provided) to secure the frame with Z-brackets.
➤ Install the vent door into the frame using the upper
tabs as a guide.
➤ Lock the vent door into place by fully seating and
twisting the black latches in the bottom corners of
the vent door.
Upper Metal Side Vent (No. 80301223xx)
15
21"
10-1/4"
➤ Place the vent over the cutout.
➤ Secure the frame using sixteen #10 screws (not
provided).
I
Rivets could be used for this vent.
19
Upper Metal Side Vent (No. 3100451.xxx)
14
Cutout
7-3/4"
➤ Place the vent over the cutout.
➤ Secure the frame using fourteen #10 screws Not
provided).
I
Rivets could be used for this vent.
Lower Metal Side Vent (No. 3102364.xxx,
80302113xx)
16
Cutout
9-11/16"
➤ Place the vent over the cutout.
➤ Secure the frame using sixteen #10 screws (not
provided).
I
Rivets could be used for this vent.
Refrigerator
19-1/4"
Cutout
19-1/4"
Cutout
EN