Installing The Vent Application; Roof Vent Application - Dometic DM Series Installation Manual

5.4 Installing the vent application

 FIRE OR EXPLOSION HAZARD. Make sure vent allows raw (unburned) LP Gas to escape to the
outside. LP Gas is heavier than air, and will collect at floor level if not vented correctly. Failure to obey this warning
could result in death or serious injury.
I
Read before proceeding:
• Use the inboard installation option when the radius of the roof, or the presence of building materials,
interferes with the placement of the roof vent.
• All fasteners are to be provided by the installer.
• Select the appropriate screw types for the application for which they are being used.
• Minimize screw lengths to fit applications appropriately, unless otherwise noted.
• Rivets are acceptable only where noted.
➤ Apply sealant around the thread or rivet body of all fasteners.
➤ Apply dry sealant around the surface mounting face of all vent frames or vent bases before installation.
➤ Apply wet sealant around the perimeter of all vent frames or vent bases after installation. Do not allow the
sealant to block the molded weep tracks in the vent frame.

Roof vent application

10
Roof Vent
Side
View
17
Recess Depth
11
Roof Vent
Side
View
Refrigerator
Recess Depth
EN