Installing And Connecting The Refrigerator - Dometic Coolmatic CR50 Operating Manual

Installing and connecting the refrigerator

7 Installing and connecting the
refrigerator
7.1 Safety instructions for installation on boats
Please note the following instructions for installation on boats:
D
DANGER!
If the appliance is powered by the mains, ensure that the power supply
has a residual current circuit breaker.
A
NOTICE!
• The device can be tilted sideways up to 30°. When setting up the
refrigerator, note that it must be fastened to take account of this. If
you have any questions regarding installation, consult your specialist
dealer.
• Install the refrigerator so that the warm air produced can easily flow
away (either upwards or to the sides, fig. 8, page 5).
• The appliance is designed for ambient temperatures between
+18 °C and +43 °C.
Observe all the other installation instructions in this section.
7.2 Installing the refrigerator
A
NOTICE!
• Fasten the device as described in the operating manual to prevent
hazards.
• Keep objects clear of openings in the housing or mounting structure
(such as ventilation slots).
• The refrigerator is only suitable for installation in a fitted niche. Once
it is installed, only the front of the appliance may be accessible.
I
NOTE
In the case of integrated refrigerators, please remove the locking
mechanism at the top and bottom. You can contact the Dometic branch
in your country for more information (addresses on the back of the oper-
ating manual).
18
CoolMatic
EN