Installation
Positioning of lower and upper ventilation
grilles LS300 or L500 (NZ)
LS300
or
L500
(NZ)
Flue kit
3776
H
LS300
or
L500
(NZ)
Minimum height of ventilation H
1.
Roof exhaust vent
2.
Upper vent grille LS300/L500
The bottom of the upper ventilation grille must
be equal to or above the height of the refrige-
rator.
i
Correct mounting of the lower ventilation grille
facilitates access to the connections and
functional parts during maintenance.
A
optional ventilation
aperture Ø min 40 mm
Fig. 17
1250 mm
Height of fridge
4.3.3 Installing the vent grilles
To install the ventilation grilles cut two rectan-
gles to suit vents in the outer wall of the vehi-
cle ( for position of the cuts, see figures 12, 17) .
AS 1625
1
Seal
the
mounting
frame making it water-
proof ( does not apply
for mounting frames
with integral seal ).
2
Insert frame and screw
into position
3
Insert and lock ventilati-
on grille.
4
Clip the insert for flue
gas duct in position.
16
Fig. 18
Fig. 19
Fig. 20
Fig. 21