Standard Speed (P022 - P023) - Siemens SITRANS WM300 MFA Operating Instructions Manual

Parameter assignment
6.5 Slow speed
6.5.7.2

Standard speed (P022 - P023)

For relay output Q2
Probe B under speed setpoint (P022) for relay output Q2. Enter the frequency between
pulses in an under speed situation. Probe B over speed setpoint (P023) for relay output Q2.
Enter the frequency between pulses in an over speed situation. The setpoint value (Max Hz)
for input I4 represents the 20 mA analog output AQ2. Only set the value if the non-contact
tachometer function will be used.
● P022: xxx Seconds
● P023: xxx Seconds
44
SITRANS WM300 MFA
Operating Instructions, 08/2018, A5E45090709-AA