Slow Speed (P013) - Siemens SITRANS WM300 MFA Operating Instructions Manual

6.5.5

Slow speed (P013)

For relay output Q2
Over speed setpoint shall indicate when the process speed of the target device has
increased past a safe working speed/rotation within the process. Enter the number of
seconds between pulses in an under speed situation.
● P013: xxx Seconds
Values
Run display features seconds between pulses for probe A and B and relay output status.
SITRANS WM300 MFA
Operating Instructions, 08/2018, A5E45090709-AA
Setpoint 00:00:xx (HH:MM:SS)
range 0 ... 399s then resets back to 0
Input I4 – Over speed alarm output relay Q2
Parameter assignment
6.5 Slow speed
41