Electric Heaters - York SUNLINE 2000 D3CE 036 Installation Instruction

530.26-N1YI
FIG. 6 - ENTHALPY SET POINT ADJUSTMENT

ELECTRIC HEATERS

Electric heaters are available as field-installed accessories.
Refer to the accessory instruction for installation instructions.
These UL and CGA approved heaters are located within the
central compartment of the unit (see Figure 5 for access panel)
with the heating elements extending into the supply air
chamber.
8
The heaters are wired for a single point power supply. Power
supply need only be brought into the single point terminal block
and thermostat wiring to the low voltage terminal strip located
in the upper portion of the unit control box.
Fuses are supplied, where required, by the factory. Some KW
sizes require fuses and others do not. Refer to the accessory
instruction for electrical data.
Unitary Products Group