Table of Contents
Advertisement
manual\Final\218839311_FM\01GB10ADJ.fm
01GB01.book Page 85 Mardi, 7. septembre 2004 9:41 09
Audio DRC (Dynamic Range Control) (DVDs
only)
Makes the sound clear when the volume is turned
down when playing a DVD that conforms to
"Audio DRC." This affects the output from the
following jacks:
– LINE 2 OUT AUDIO L/R jacks
– LINE 1-TV jack
– LINE 3 jack
– DIGITAL OUT (OPTICAL or COAXIAL) jack
only when "Dolby Digital" is set to "D-PCM"
(page 85).
Standard
Normally select this
position.
TV Mode
Makes low sounds clear
even if you turn the volume
down.
Wide
Gives you the feeling of
Range
being at a live performance.
Downmix (DVDs only)
Switches the method for mixing down to two
channels when you play a DVD which has rear
sound elements (channels) or is recorded in Dolby
Digital format. For details on the rear signal
components, see "Checking the Play Information
and Playing Time" (page 35). This function
affects the output of the following jacks:
– LINE 2 OUT AUDIO L/R jacks
– LINE 1-TV jack
– LINE 3 jack
– DIGITAL OUT (OPTICAL or COAXIAL) jack
when "Dolby Digital" is set to "D-PCM"
(page 85).
Dolby
Normally select this
Surround
position.
Multi-channel audio signals
are output to two channels
for enjoying surround
sounds.
Normal
Multi-channel audio signals
are downmixed to two
channels for use with your
stereo.
D:\DVD
Digital Out
Selects if audio signals are output via the
DIGITAL OUT (OPTICAL or COAXIAL) jacks.
On
Off
To set the digital output signal
The following setup items switch the method of
outputting audio signals when you connect a
component such as an amplifier (receiver) with a
digital input jack.
For connection details, see "Connecting the Audio
Cords" (page 17).
Select "Dolby Digital," "MPEG," and "DTS"
after setting "Digital Out" to "On."
SETUP
Settings
Audio ATT :
DTV Settings
Audio DRC :
Video
Downmix :
Audio
Digital Out :
Features
Password
Options
Easy Setup
If you connect a component that does not accept
the selected audio signal, a loud noise (or no
sound) will come out from the speakers, and may
affect your ears or cause speaker damage.
• Dolby Digital (DVDs only)
Selects the type of Dolby Digital signal.
D-PCM
Dolby
Digital
master page=right
Normally select this
position. When you select
"On," see "To set the digital
output signal" for further
settings.
The influence of the digital
circuit upon the analogue
circuit is minimal.
Off
Standard
Dolby Surround
On
Dolby Digital :
D-PCM
MPEG :
PCM
DTS :
Off
Select this when the recorder
is connected to an audio
component lacking a built-in
Dolby Digital decoder. You
can select whether the
signals conform to Dolby
Surround (Pro Logic) or not
by making adjustments to
the "Downmix" item in
Audio Setup (page 85).
Select this when the recorder
is connected to an audio
component with a built-in
Dolby Digital decoder.
,continued
RDR-GXD500
2-188-393-11(1)
85
Advertisement
Table of Contents
