Table of Contents
Advertisement
manual\Final\218839311_FM\01GB04BAS.fm
01GB01.book Page 23 Mardi, 7. septembre 2004 9:41 09
3
Switch the input selector on your TV so that
the signal from the recorder appears on
your TV screen.
"Initial settings necessary to operate the DVD
recorder will be made. You can change them
later using Setup.
Before you start, check that you have made all
necessary connections.
If you have preset any timer recordings they
will be erased." appears.
• If this message does not appear, select "Easy
Setup" from "SETUP" in the System Menu
to run Easy Setup. For details, see "Settings
and Adjustments" (page 76).
4
Select "Start," and press ENTER.
The Auto Tune display appears showing a
tuning progress bar and the number of
channels found.
EASY SETUP
Auto Tune
Number of channels found
32
Searching ...
When Auto Tune has ended, a completion
display appears indicating the number of TV
and Radio channels that have been found and
stored.
EASY SETUP
Auto Tune
Number of channels found
Number of TV Channels
Number of Radio Channels
Tuning has sucessfully completed
To set the channels manually, see page 80.
D:\DVD
5
6
1/5
7
1/5
50
30
20
8
9
master page=right
In case the current time and date could not
be set automatically thanks to your local
stations time signal broadcasts, the
display for setting the clock manually
appears.
EASY SETUP
Clock
The clock was not set automatically.
Set the time and date manually.
Tue 14
9
2004
21
:
00
Set the clock manually using </M/m/,.
Press ENTER.
The TV Type Setup Display appears.
EASY SETUP
TV Type
Select your TV screen type.
16 : 9
4 : 3 Letter Box
4 : 3 Pan Scan
Select the setting that matches your TV
type.
"16:9": For wide-screen TVs or standard TVs
with a wide screen mode.
"4:3 Letter Box": For standard TVs.
Displays "wide screen" pictures with bands
on the upper and lower sections of the screen.
"4:3 Pan Scan": For standard TVs.
Automatically displays "wide screen"
pictures on the entire screen and cuts off the
sections that do not fit.
For details, see "TV Type" on page 82.
Press ENTER.
The Setup Display for the component out
jacks appears.
Select an option.
Select "On" if you are using the
COMPONENT VIDEO OUT jacks.
Otherwise, select "Off."
2/5
23
,continued
RDR-GXD500
2-188-393-11(1)
Advertisement
Table of Contents
