Table of Contents
Advertisement
manual\Final\218839311_FM\01GB06REC.fm
01GB01.book Page 47 Mardi, 7. septembre 2004 9:41 09
To stop recording during timer recording
Open the remote's cover and press x REC STOP.
Note that it may take a few seconds for the
recorder to stop recording.
Rec Mode Adjust
If there is not enough available disc space for the
recording, the recorder automatically adjusts the
recording mode to enable the entire programme to
be recorded. This function is normally set to "On."
To cancel this function, press TOOLS while the
Timer List is displayed. Select "Rec Mode
Adjust" and press ENTER. Select "Off" and press
ENTER.
If the timer settings overlap
Overlapped timer settings are shown as follows.
Timer
These timer settings overlap. Do you want to continue?
Fri 29.10
21:00-22:00
AAB
SP
Fri 29.10
21:30-22:30
DEF
SP
OK
To store the setting as shown, select "OK." The
programme that starts first has priority and the
second programme starts recording only after the
first programme has finished (page 52).
To cancel the overlapped timer setting, select
"Cancel."
To confirm, change, or cancel timer recording
See "Checking/Changing/Cancelling Timer
Settings (Timer List)" (page 51).
To extend the recording duration time while
recording
1
Press TOOLS during recording.
The TOOLS menu appears.
2
Select "Extend Rec" and press ENTER.
Extend Rec. Time
Set the timer extend function.
Tue 28.9
10:00-11:30
AAB
Extend Time
Off
3
Press M/m to select the duration time.
You can set the duration in increments of 10
minutes, for a maximum of 60 minutes.
4
Select "OK" and press ENTER.
D:\DVD
One Touch Timer
If you use the SMARTLINK connection, you can
easily display the timer programming menu.
When the TV is turned on or in standby mode,
insert a disc and press [TIMER]. The recorder
automatically turns on and the TV's input is
switched to the recorder. The Timer programming
menu appears.
z Hint
You can play the recorded programme by selecting the
programme title in the Title List menu.
• If "The disc is full or nearly full" appears on the screen,
• Check that the clock is correctly set before setting the
• Even if the timer is set for the same daily or weekly
• Even if the timer is set, timer recordings cannot be
Cancel
OK
Cancel
SP
Notes
change the disc, or make available space for the
recording (DVD+RW/DVD-RW only) (page 70).
timer recording. If not, the timer recording cannot be
made.
programme, the timer recording cannot be made if it
overlaps with a programme that has priority. "
appear next to the overlapped setting in the Timer List.
Check the priority order of the settings (page 51).
made while recording a programme that has priority.
master page=right
" will
47
,continued
RDR-GXD500
2-188-393-11(1)
Advertisement
Table of Contents
