Table of Contents
Advertisement
manual\Final\218839311_FM\01GB10ADJ.fm
01GB01.book Page 80 Mardi, 7. septembre 2004 9:41 09
When Auto Tune has ended, a completion
display appears indicating the number of TV
and Radio channels that have been found and
stored.
Auto Tune
Number of channels found
Number of TV Channels
Number of Radio Channels
Tuning has sucessfully completed
3
Press the ENTER button to remove the
display and view the first channel captured.
Manual Tune
This option allows you to capture and store
individual services.
1
Once the DTV Settings - Tuning menu
displayed, select "Manual Tune," and press
ENTER.
The Manual Tune Display appears showing a
list of all the channels previously captured and
stored.
Manual Tune
Programme
UHF Channel
001
50
002
50
003
43
004
43
005
40
Page Up
Page Down
If you want to display the previous or next five
available channels, press the RED or GREEN
button on your remote control.
2
Press the M/m buttons or enter a channel
number to select the programme number of
your choice, then press the ENTER button.
The Tuning screen appears with the selected
channel on view in the background
Manual Tune
Programme:
003
Service:
NC5
UHF Channel:
Search:
Search Up
43
Search Down
80
D:\DVD
50
30
20
Service
DDE News
AAC
NCE 5
Channel J
Digital Teletext
Status:
Not Searching
3
Press the ,/M/m button to highlight either
'Search Up' or 'Search Down' then press the
ENTER button to begin searching up or
searching down.
The Service searching process starts.
Manual Tune
Programme:
003
Status:
Service:
NC5
UHF Channel:
Search:
Search Up
43
Search Down
After a while, when a service is found, the
display shows a list of captured channels.
Manual Tune
Programme:
003
6 Services found:
Service:
NC5
DDE News
AAC
NCE 5
UHF Channel:
Search:
Channel J
Search Up
Digital Teletext
43
Search Down
4
Press the M/m buttons to move arround the
list. Once the channel you wish to store is
highlighted, press the ENTER button.
5
Once you have stored your desired channel,
press the RETURN button repeatedly to
return to the main menu.
Note
After tuning, your receiver will continually monitor
broadcast information to check for new channels. Should
a new channel become available, it is detected and
automatically added to your programme list. Normally it
will then be available to view. However, if you notice a
new channel that you are unable to view, please tune it in
manually using the 'Manual Tune' procedure as
explained above.
master page=left
Searching...
RDR-GXD500
2-188-393-11(1)
Advertisement
Table of Contents
