Panasonic S-200PE2E5 Technical Data & Service Manual page 157

Item code Item
Automatic drain pump
operation
Ventilation fan operation
Wired remote controller
sensor
"Operation change control in
progress" display
OFF reminder function for
when weekly timer is used
Heat exchanger temperature
for cold air discharge
(Heat exchanger control
point for control to prevent
cold air)
Fan output switching
Drain pump delayed start
time
Flap operation mode
Flap swing mode
Fan tap setting
(External static pressure of
the rated air flow volume)
Repeat timer switching
Timer function change
prohibit
Smudging control
No.
0000 No forced operation
0001 Forced operation for 1 minute
Continuous operation
0060
None
0000
0001 Ventilation fan operated by remote controller.
0000 Not used. (Body sensor is used.)
Remote controller sensor is used.
0001
Normal (displayed)
0000
Not displayed
0001
0000 None
0001
Only stop time setting is enabled.
0013 Control temperature 13°C
0014 Control temperature 14°C
0025 Control temperature 25°C
0026 Control temperature 26°C
0000 Output linked with fan. (ON when indoor unit fan is operating.)
0001 Fan mode operation output
0000 No delayed start
0001 1 min. delayed start
0002 2 min. delayed start
0058 58 min. delayed start
0059 59 min. delayed start
0060 60 min. delayed start
0000 Standard setting
Draft reduction mode (Flap lower-limit position is shifted
0001
upwards.)
Smudging reduction mode (Flap swing upper-limit position is
0000
shifted downwards.)
0001 Normal mode
Draft reduction mode (Flap swing lower-limit position is shifted
0002
upwards.)
Type 200: 60Pa, Type 250: 72Pa
0001
(Setting at shipment)
0002 140Pa
0003 270Pa
0000 Function disabled
0001 Function enabled
0000 Function disabled
0001 Function enabled
0000 No smudging control
7-7
Setting data
Description
Indoor unit
Type E2
7