Din Track And Accessories - Omron CK3M Series User Manual

4 Installation
Precautions for Safe Use
Always turn OFF the power supply to the Controller before attempting any of the following.
• Mounting or removing CK3W-AX Units or CPU Units.
• Assembling the Units.
• Setting rotary switches.
• Connecting cables or wiring the system.
• Connecting or disconnecting the connectors.
4-3-4

DIN Track and Accessories

Mount the CK3M-series Controller on the DIN Track.
Secure each DIN Track inside a control panel with at least three screws.
DIN Tracks
Secure the DIN Track to the control panel using M4 screws separated by 210 mm (3 holes) or less
and using at least 3 screws. The tightening torque is 1.2 N·m.
 PFP-100N2
4.5
15 25
 PFP-100N/50N
4.5
15 25
DIN Track End Plates
PFP-M (2 required)
4-12
28-25 × 4.5 oblong holes
25 25 25
10 10
1000
25 25 25
10 10
1,000 (500) *1
CK3M-series Programmable Multi-Axis Controller User's Manual Hardware (O036)
16
24
30±0.3 27
15 1
±
7.3 0.15
±
±
35 0.3
27 0.15
15 (5) *1
1
*1. PFP-50N dimensions are
given in parentheses.
29.2
1.5