Mercedes-Benz 260 E 124 1988 Owner's Manual page 95

Front Head Restraints
Removing head restraints:
Bring the head restraint to its highest
position.
Depress release button (1) beneath
the seatback covering material and
pull head restraint up sharply, holding
it by the left head restraint post
(viewed in driving direction). Then pull
out head restraint completely with
both hands.
The release button (1) is located be­
low the left head restraint post on both
front seats.
Installing head restraints:
Insert the head restraint and push it
down to the stop.
Check if the highest position can be
reached. (Power head restraints: slide
the switch up for approximately 5 sec­
onds; manual head restraints: pull
handwheel out and rotate it rearward
to the stop.)
Adjust head restraint to the desired
position.
Warning!
For your protection, drive only with
properly positioned head restraints.
Do not drive the vehicle without the
front seat head restraints. Head
restraints are intended to help re­
duce injuries during an accident.
For positioning of head restraints refer
to pages 31, 32 and 33.
Spare Parts Service
All authorized MERCEDES-BENZ
dealers maintain a stock of original
spare parts required for maintenance
and repair work. In addition, strategi­
cally located parts distribution centers
provide quick and reliable parts
service.
More than 200,000 different spare
parts, even for older models, are avail­
able.
MERCEDES-BENZ original spare
parts are subjected to the most strin­
gent quality inspections. Each part has
been specifically developed, manufac­
tured or selected for and adapted to
MERCEDES-BENZ vehicles.
Therefore, MERCEDES-BENZ original
spare parts should be installed.
93