Hookups
Hooking Up the Player
Follow Steps 1 to 4 to hook up and adjust the settings of the player.
Before you start, disconnect the power cords (mains leads), check that you have all of the
supplied accessories, and insert the batteries into the remote (page 15).
Notes
Plug cords securely to prevent unwanted noise.
Refer to the instructions supplied with the components to be connected.
Step 1: Connecting the Video Cords
Connect this player to your TV monitor, projector, or AV amplifier (receiver) using a video
cord. Select one of the patterns A through C, according to the input jack on your TV
monitor, projector, or AV amplifier (receiver).
A
INPUT
VIDEO
L
AUDIO
R
TV, projector, or AV
amplifier (receiver)
to LINE OUT (VIDEO)
to S VIDEO OUT
l : Signal flow
18
(yellow)
Audio/video cord
(supplied)
(yellow)
DIGITAL OUT
LINE OUT
COMPONENT
Y
VIDEO OUT
PCM/DTS/MPEG/
S VIDEO
DOLBY DIGITAL
OUT
C
B
COAXIAL
OPTICAL
R-AUDIO-L
VIDEO
C
R
S VIDEO cord
(not supplied)
Component
video cord
(not supplied)
(green)
(blue)
CD/DVD player
COMPONENT
VIDEO IN
Y
(green)
C
B
(blue)
C
R
(red)
TV, projector, or AV
amplifier (receiver)
(red)
to COMPONENT
VIDEO OUT
INPUT
S VIDEO
TV, projector, or AV
amplifier (receiver)
C
B