Sony DVP-NS305 Operating Instructions Manual page 64

DTS (DVD only)
Selects whether or not to output DTS
signals.
OFF
ON
Note
If you select one of the TVS settings while playing
a DVD, the player does not output the following
signals from the DIGITAL OUT (OPTICAL or
COAXIAL) jack.
– Dolby Digital signals (when you set "DOLBY
DIGITAL" in "AUDIO SETUP" to "D-PCM")
(page 63).
– MPEG audio signals.
64
Select this when the player is
connected to an audio
component lacking a built-in
DTS decoder.
Select this when the player is
connected to an audio
component with a built-in
DTS decoder.