Sound Adjustments; Changing The Sound - Sony DVP-NS305 Operating Instructions Manual

Sound Adjustments

Changing the Sound

When playing a DVD recorded in multiple
audio formats (PCM, Dolby Digital, MPEG
audio, or DTS), you can change the audio
format. If the DVD is recorded with
multilingual tracks, you can also change the
language.
With CDs, DATA CDs, or VIDEO CDs, you
can select the sound from the right or left
channel and listen to the sound of the
selected channel through both the right and
left speakers. For example, when playing a
disc containing a song with the vocals on the
right channel and the instruments on the left
channel, you can hear the instruments from
both speakers by selecting the left channel.
DVP-NS305
1
Press AUDIO during playback.
The following display appears.
The number in parentheses indicates the
total number of available audio signals.
1 ( 4 ): ENGLISH
44
DVP-NS415
AUDIO
DISPLAY
2
Press AUDIO repeatedly to select
the desired audio signal.
When playing a DVD
Depending on the DVD, the choice of
language varies.
When 4 digits are displayed, they
indicate a language code. Refer to
"Language Code List" on page 70 to see
which language the code represents.
When the same language is displayed
two or more times, the DVD is recorded
in multiple audio formats.
When playing a VIDEO CD, CD, or
DATA CD (MP3 audio)
The default setting is underlined.
• STEREO: The standard stereo sound
• 1/L: The sound of the left channel
(monaural)
• 2/R: The sound of the right channel
(monaural)
When playing a Super VCD
The default setting is underlined.
• 1: STEREO: The stereo sound of the
audio track 1
• 1: 1/L: The sound of the left channel of
the audio track 1 (monaural)
• 1: 2/R: The sound of the right channel
of the audio track 1 (monaural)
• 2: STEREO: The stereo sound of the
audio track 2
• 2: 1/L: The sound of the left channel of
the audio track 2 (monaural)
• 2: 2/R: The sound of the right channel
of the audio track 2 (monaural)
Note
While playing a Super VCD on which the audio
track is not recorded, no sound will come out when
you select "2:STEREO," "2:1/L," or "2:2/R."
Checking the audio signal
format
If you press DISPLAY repeatedly during
playback, the format of the current audio
signal (Dolby Digital, MPEG audio, DTS,
PCM, etc.) appears as shown below.